BIORITIN

Our Technologies

Bioritin

What is Bioritin?

You may now find a comprehensive answer to all of your wastewater treatment-related issues with Bioritin.
Bioritin are naturally isolated (non-GMO) consortia of microbes that are dosed following Aquaritin in the wastewater.

The microbes degrade incoming pollutants like sewage, consume nutrients and minimise sludge. In India, a pioneering method based on nanoscale nutrients has been created after years of research for a comprehensive bio-remediation process that involves the treatment of wastewater using microbial formulations.

Since the process is completely natural, the supervision and maintenance are very low. The removal of pollutants is very efficient.

How does it work?

Products from Bioritin are affordable and guarantee high-quality performance. They are very effective at maintaining COD and BOD while also having the capacity to raise DO. They prevent the development of dangerous germs. They even help maintain the ecological balance by fixing carbon without disturbing levels of phosphorus, ammonia, and nitrogen.

The Bioritin line of products is biodiversity-safe and environmentally friendly. In order to remove and remediate the contaminants through biological and metabolic processes, microorganisms are added to the contaminated water as part of the bioremediation process.

The use of Bioritin with Aquaritin is a combined force that no man-made system can match.

What are the application areas?

In addition to offering a solution for wastewater, Bioritin can also be used for sewage treatment plants, small rivers, drains, and effective composting of municipal solid waste. Septic tanks and bio-toilets can both be used it.

Bioritin Products

Bio-STP

JS Wel introduced Bio- Sewage Treatment Plant which works upon the technology called “Phyco – Remediation” with AQUARITIN and BIORITIN.

It is a new 4th Gen Nano-Biotechnology that can reduce nutrients (N &P) and reduce Dissolved Salts through biological pathways leading to much superior water quality at indeed lower costs.

It promotes exponential growth of the beneficial diatoms algae. Diatoms are single-celled algae composed of a silica wall and are present in every water body. They are good indicators for scientists to observe rapid changes in water quality and nutrient conditions in any given water body.

Further, these diatoms act on organic waste and increasing the oxygen levels of the water body, facilitating the growth of aquatic species and restoring the food chain in water naturally. These algae can photosynthesize in low light conditions and are the major phytoplankton at benthic levels.

In photosynthesis they produce molecular scale (Pico, 10- 15) pure oxygen and consume nutrients, while sequestering carbon in their shells. Owing to the nano nutrient formulation embedded in nano-silica, Aquaritin enables diatoms to readily absorb nutrients thereby promoting growth. The intervention promotes two vital processes of river rejuvenation viz a higher level of Dissolved Oxygen (DO) that facilitates aquatic life and secondly the growth of aerobic bacteria that accelerates the digestion of untreated sewage entering the water channels. Aquaritin can be used to remediate lentic and lotic water bodies and is optimized for use in polluted ponds, rivers, canals, and similar irrigation channels.

In Bio- STP, this whole process takes part in the Aeration Pond, a constituent of Bio- STP After drawing waste water from polluted water body, it is passed through some major steps:-

Bar Screen Chamber and Sedimentation Tank?

This chamber is having bar screens of different sizes to get rid of large objects, such as rags and plastics from wastewater following to this, it is passed through sedimentation tank, which allows suspended particles to settle out of waste water as it flows slowly through the tank, thereby providing some degree of purification.

Aeration or Filter Feed Pond

After that process, that waste water is brought to Aeration Pond where it is dosed with Aquaritin WasteWater and Bioritin, also the aeration of this water is done here with the help of Air Diffuser Systems, Aerators and Fountains. This pond supplies this water to filters that’s why it is also called as Filter Feed Pond.

Multigrade Filters and Activated Carbon Filters

In a Multigrade Filter or pressure sand filter, water is passed through multi-layers of filter media consisting of graded sand, pebbles, and gravel layers. The contaminants in the water are captured in the media bed and filtered water passes into the discharge manifold at the bottom of the tanks then it is passed through the Activated Carbon Filter, it works on the principle of adsorption; filter medium adsorbs or reacts with a pollutant molecule then filtered water is drained out Activated carbon which is used as a medium to remove contaminants is a natural material derived from coconut shell, lignite, bituminous coal, etc. further, activated by chemical or steam in the absence of oxygen with a high temperature around 1000°C. Specific contaminants can be removed by employing blends of various carbons.

Storage Pond

After treatment water is stored here, fountains are installed in these pond to regulate the water then it is transferred to further channels. This water can be further released in water bodies as well as in many ways such as irrigation, construction, households, hospitals, parks, stadiums, institutes etc.

Bio- STP is better than conventional STPs as

Phyco- remediation induces molecular oxygen in the wastewater which supports rapid degradation of organic matter; it helps in the reducing the concentration of contaminants and undesirable components so that the water becomes fir for its desired end- use.

Very cost effective as the cost comes about 50% less than conventional STP, also the maintenance is very low.

Elimination of foul smell, also the Dissolved Oxygen increases due to molecular level aeration.

Balances the excess nutrients in the aquatic ecosystem by enabling the growth of diatoms.

Requires very less area as our product can work up to the depth of 5-6 meters, hence by increasing the depth of ponds we can save the area.

Requires very less manpower, electricity and machineries.

Very less Carbon Footprint as compared to conventional STPs.

Can Bio- STP be an alternate of Conventional STPs

Yes, of course. As we have clearly seen that Bio- STP is far better that conventional STP as it has many benefits. It can be a helping hand to save our water bodies which are in worst conditions. We can remediate lakes, ponds, rivers and drains having discharge of 15 MLD. We did the same in Delhi Golf Club as they were struggling for good quality irrigation water. They were taking irrigation water from Okhla STP and Paying 60- 80 Lakhs per annum. Despite that the water quality of that treated water was not up to the mark resulting in deterioration of greens in Golf Course. Even the condition of their STP was really bad. We treated the irrigation pond with our product and achieved good results but still the treated water was not adequate for course as the capacity of the pond was 1.8 Million Litres and the peak load in summers was 2.5 MLD. In order to achieve the requirement, we proposed a Bio- STP @ 3MLD in DGC After approval, erected and commissioned it. There, we are drawing waste water from the NDMC drain with the help of submersibles and also providing treated water @0.5 MLD to NDMC.

Aerators and fountains

Wastewater aeration is the process of adding air into wastewater to allow aerobic bio-degradation of the pollutant components. It is an integral part of most biological wastewater treatment systems.

Unlike chemical treatment which uses chemicals to react and stabilize contaminants in the wastewater stream, biological treatment uses microorganisms that occur naturally in wastewater to degrade wastewater contaminants.

Aeration is the most critical component of a treatment system using the activated sludge process. A well-designed aeration system or Aerator has a direct impact on the level of wastewater treatment it achieves.

An ample and evenly distributed oxygen supply in an aeration system is the key to rapid, economically viable, and effective wastewater treatment.

Wastewater aeration is the process of adding air into wastewater to allow aerobic bio-degradation of the pollutant components. It is an integral part of most biological wastewater treatment systems. Unlike chemical treatment which uses chemicals to react and stabilize contaminants in the wastewater stream, biological treatment uses microorganisms that occur naturally in wastewater to degrade wastewater contaminants.
Aeration is the most critical component of a treatment system using the activated sludge process. A well designed aeration system or Aerator has a direct impact on the level of wastewater treatment it achieves. An ample and evenly distributed oxygen supply in an aeration system is the key to rapid, economically-viable, and effective wastewater treatment.

Biofence

Bio-fence is a revolutionary 3 in 1 barrier that is prepared with PVC perforated tubes containing natural flocculants (Moringa Oliefera seeds) coated with Nano nutrients in a buoyant fence like structure.

The purpose of the bio-fence is to block the solid waste and flocculate the water bodies.

As the water flows through the numerous holes made into the tubes, it comes in contact with natural bio flocculants treated with Aquaritin.

The Bio-fence has 3-in-1 function:

  • It blocks the solid waste from flowing past them.
  • They bio-flocculate suspended solids.
  • Remediates the water, improving the quality 24×7 and reduces the salts of heavy metals.

Benefits:

  • It has anti-bacterial properties
  • Reduces the salts of heavy metals.
  • Blocks solid waste making it easier to dispose and clean.
  • Bio-flocculate the suspended solids.
  • Fights against plastic pollution.

Area of Application:

  • It is usually installed in inlets, canals, rivers or drains merging with the river, a dam or a large lake.

Ultrasonic AlgaeClear

AlgaeClear L and AlgaeClear XL are ultrasonic devices designed to mitigate blue-green algae (BGA) and green algae populations.

The system uses ultrasonic waves generated through the transducers, which emit 360 degrees around the system.

The system is left in the water 24/7 and works day and night in a pre-programmed setup. Multiple frequency ultrasonic emissions are made with frequency hopping control to optimize functioning against various species of algae.

Users can expect a reduction of about 70% to 90% within 3 months. The reduction is measured through water quality (WQ) tests that measure BGA and algae levels. The company provides such measuring equipment and expertise.

 

The AlgaeClear L is well suited for smaller coverage areas, making it ideal for ponds, golf courses, small reservoirs, wastewater treatment clarifiers, and irrigation ponds.

The AlgaeClear XL adds more ultrasonic boost to allow even more coverage than the AlgaeClear L, making it ideally suited for larger bodies of water such as lakes and reservoirs, wastewater lagoons, irrigation basins, and distribution water tanks.

AlgaeClear L and AlgaeClear XL are environmentally friendly, safe, and cost-effective solutions for removing algae from water bodies. The use of ultrasonic technology provides a long-term solution for maintaining the water quality and ensuring the health of aquatic life.

Add to cart